Audio Reverb Filter
Switch to ScriptingThe Audio Reverb Filter takes an Audio Clip and distorts it to create a custom reverb effect.
Properties
| Property: | Function: |
|---|---|
| Reverb Preset | Custom reverb presets, select user to create your own customized reverbs. |
| Dry Level | Mix level of dry signal in output in mB. Ranges from –10000.0 to 0.0. Default is 0. |
| Room | Room effect level at low frequencies in mB. Ranges from –10000.0 to 0.0. Default is 0.0. |
| Room HF | Room effect high-frequency level in mB. Ranges from –10000.0 to 0.0. Default is 0.0. |
| Room LF | Room effect low-frequency level in mB. Ranges from –10000.0 to 0.0. Default is 0.0. |
| Decay Time | Reverberation decay time at low-frequencies in seconds. Ranges from 0.1 to 20.0. Default is 1.0. |
| Decay HFRatio | Decay HF Ratio : High-frequency to low-frequency decay time ratio. Ranges from 0.1 to 2.0. Default is 0.5. |
| Reflections Level | Early reflections level relative to room effect in mB. Ranges from –10000.0 to 1000.0. Default is –10000.0. |
| Reflections Delay | Early reflections delay time relative to room effect in mB. Ranges from –10000.0 to 2000.0. Default is 0.0. |
| Reverb Level | Late reverberation level relative to room effect in mB. Ranges from –10000.0 to 2000.0. Default is 0.0. |
| Reverb Delay | Late reverberation delay time relative to first reflection in seconds. Ranges from 0.0 to 0.1. Default is 0.04. |
| HFReference | Reference high frequency in Hz. Ranges from 20.0 to 20000.0. Default is 5000.0. |
| LFReference | Reference low-frequency in Hz. Ranges from 20.0 to 1000.0. Default is 250.0. |
| Diffusion | Reverberation diffusion (echo density) in percent. Ranges from 0.0 to 100.0. Default is 100.0. |
| Density | Reverberation density (modal density) in percent. Ranges from 0.0 to 100.0. Default is 100.0. |
Note: These values can only be modified if your Reverb Preset is set to User, else these values will be grayed out and they will have default values for each preset.