Script interface for the Limit Velocity Over Lifetime module.
| dampen | Controls how much the velocity that exceeds the velocity limit should be dampened. |
| drag | Controls the amount of drag applied to the particle velocities. |
| dragMultiplier | Change the drag multiplier. |
| enabled | Enable/disable the Limit Force Over Lifetime module. |
| limit | Maximum velocity curve, when not using one curve per axis. |
| limitMultiplier | Change the limit multiplier. |
| limitX | Maximum velocity curve for the X axis. |
| limitXMultiplier | Change the limit multiplier on the X axis. |
| limitY | Maximum velocity curve for the Y axis. |
| limitYMultiplier | Change the limit multiplier on the Y axis. |
| limitZ | Maximum velocity curve for the Z axis. |
| limitZMultiplier | Change the limit multiplier on the Z axis. |
| multiplyDragByParticleSize | Adjust the amount of drag applied to particles, based on their sizes. |
| multiplyDragByParticleVelocity | Adjust the amount of drag applied to particles, based on their speeds. |
| separateAxes | Set the velocity limit on each axis separately. |
| space | Specifies if the velocity limits are in local space (rotated with the transform) or world space. |
Did you find this page useful? Please give it a rating: