The Audio Reverb Filter takes an Audio ClipA container for audio data in Unity. Unity supports mono, stereo and multichannel audio assets (up to eight channels). Unity can import .aif, .wav, .mp3, and .ogg audio file format, and .xm, .mod, .it, and .s3m tracker module formats. More info
See in Glossary and distorts it to create a custom reverb effect.
Property: | Function: |
---|---|
Reverb Preset | Custom reverb presets, select user to create your own customized reverbs. |
Dry LevelAn audio setting that allows you to set the mix level of unprocessed signal in output in mB. See in Glossary |
Mix level of dry signal in output in mB. Ranges from –10000.0 to 0.0. Default is 0. |
Room | Room effect level at low frequencies in mB. Ranges from –10000.0 to 0.0. Default is 0.0. |
Room HF | Room effect high-frequency level in mB. Ranges from –10000.0 to 0.0. Default is 0.0. |
Room LF | Room effect low-frequency level in mB. Ranges from –10000.0 to 0.0. Default is 0.0. |
Decay Time | Reverberation decay time at low-frequencies in seconds. Ranges from 0.1 to 20.0. Default is 1.0. |
Decay HFRatio | Decay HF Ratio : High-frequency to low-frequency decay time ratio. Ranges from 0.1 to 2.0. Default is 0.5. |
Reflections Level | Early reflections level relative to room effect in mB. Ranges from –10000.0 to 1000.0. Default is –10000.0. |
Reflections Delay | Early reflections delay time relative to room effect in mB. Ranges from 0 to 0.3. Default is 0.0. |
Reverb Level | Late reverberation level relative to room effect in mB. Ranges from –10000.0 to 2000.0. Default is 0.0. |
Reverb Delay | Late reverberation delay time relative to first reflection in seconds. Ranges from 0.0 to 0.1. Default is 0.04. |
HFReference | Reference high frequency in Hz. Ranges from 1000.0 to 20000.0. Default is 5000.0. |
LFReference | Reference low-frequency in Hz. Ranges from 20.0 to 1000.0. Default is 250.0. |
Diffusion | Reverberation diffusion (echo density) in percent. Ranges from 0.0 to 100.0. Default is 100.0. |
Density | Reverberation density (modal density) in percent. Ranges from 0.0 to 100.0. Default is 100.0. |
Note: These values can only be modified if your Reverb Preset is set to User, else these values will be grayed out and they will have default values for each preset.
AudioReverbFilter
Did you find this page useful? Please give it a rating:
Thanks for rating this page!
What kind of problem would you like to report?
Thanks for letting us know! This page has been marked for review based on your feedback.
If you have time, you can provide more information to help us fix the problem faster.
Provide more information
You've told us this page needs code samples. If you'd like to help us further, you could provide a code sample, or tell us about what kind of code sample you'd like to see:
You've told us there are code samples on this page which don't work. If you know how to fix it, or have something better we could use instead, please let us know:
You've told us there is information missing from this page. Please tell us more about what's missing:
You've told us there is incorrect information on this page. If you know what we should change to make it correct, please tell us:
You've told us this page has unclear or confusing information. Please tell us more about what you found unclear or confusing, or let us know how we could make it clearer:
You've told us there is a spelling or grammar error on this page. Please tell us what's wrong:
You've told us this page has a problem. Please tell us more about what's wrong:
Thank you for helping to make the Unity documentation better!
Your feedback has been submitted as a ticket for our documentation team to review.
We are not able to reply to every ticket submitted.